|
POLYCLEAN-SR is a unique oil & grease stain remover-cum-scouring agent for cotton, polyester & thier blends. It is easily miscible with water in all proportions & is compatible with Acid or Alkaline conditions normally used for desizing or scouring. It is free of Chlorinated Solvents, oxidizing & reducing agents & no special precautions are needed in its handling. It is remarkable that even on padding with POLYCLEAN SR, cloth is freed from HALO mark, in fact it gives best detergency. |
|
|
|
|
|
GENERAL CHARACTERISTICS : |
|
|
|
|
|
» APPEARANCE : Light brown coloured viscous liquid.
» pH: 6 to 7.
» STABILITY TO HARD WATER: Good.
» IONIC NATURE: Nonionic. |
|
|
|
|
|
APPLICATION : (For 100Kgs. Cloth) |
|
|
|
|
|
SYNTHETICS : In Jigger POLYCLEAN-SR 1.5Kgs., at 600 to 800C for 6 turns & H202(50%) 1kg., POLYCOL-TPS 0.5Kg. for bleaching along with soda ash 1.0Kg, or Caustic Soda 0.5Kg.
SYNTHETIC & COTTON BLEND : In Jigger POLYCLEAN-SR 1.5Kgs., Caustic Soda 1 1/2Kgs., Soda Ash 1Kg. at boil for 6 turns & H202(50%) 2kgs., POLYCOL TPS 0.75Kg. for bleaching.
The scoured cloth shows the maximum dye absorption and optimum penetration in the printed goods giving maximum colour value.
JET DYEING
When the oil stains are not heavy the gray cloth may be heat set and straightway loaded in Jet Dyeing Machine. POLYCLEAN-SR 1.5Kgs. may be added with usual colour & chemicals and dyeing carried out in the normal manner. The stains are seen to be effectively removed and cloth are dyed satisfactorily without any additional scouring.
Role of POLYCLEAN – SR in removing “KANDI MARKS”
The following recipe has been found to be most effective for removal of “Kandi Marks” :
POLYCLEAN-SR – 10g/l
Soda Ash – 10g/l
H202(50%) – 1%(OWF)
POLYCOL-TPS – 2g/l
The Fabric is to be treated at 900C for 1hour. |
|
|
|
|
|
PACKING: 50kgs. net in HDPE Containers. |
|
