| Textile Pretreatments Chemicals |
|
» ANTISTAT – PV (Antistatic Agent) |
|
 |
|
ANTISTAT-PV is speciality chemical developed exclusively for use during processing of synthetic or synthetic / viscose blend to dissipate static charge developed due to frictional motion. |
|
|
|
|
|
GENERAL CHARACTERISTICS : |
|
|
|
|
|
» APPEARANCE: Pale Yellow clear liquid.
» IONIC NATURE: Non Ionic.
» SOLUBILITY: Readily soluble giving clear solution in water.
» STORAGE: Stable under normal condition. |
|
|
|
|
|
APPLICATION : |
|
|
|
|
|
ANTISTAT-PV is applied in the form of its freshly prepared aqueous solution which can be made by dissolving 10 – 20 parts of ANTISTAT-PV in 90 – 80 parts of de-mineralised water. Since it is readily soluble in water, additional efforts of mixing are not required.
ANTISTAT-PV minimises the built up of static charges on fabric during processing & therefore, smoothens the working of the process.
Being a well balanced mixture of lubricant, wetting agent, antistat & emulsifier, pick-up of air-borne dust is also reduced.
ANTISTAT-PV imparts very low frictional & excellent antistatic properties. It can be washed off easily after finishing operation is over. |
|
|
|
|
|
PACKING: 50Kgs. net in Plastic Container. |
|
|
» POLYCLAW – CHA (Water Softener) |
|
|
POLYCLAW-CHA is an effective water softening agent & it also chelates iron particles. Its double action ensures least wastage of scouring & bleaching agents & ensures better & excellent softening effect on the fabrics. |
|
|
|
|
|
GENERAL CHARACTERISTICS : |
|
|
|
|
|
» APPEARANCE: Colourless Liquid.
» COMPATIBILITY: Good. |
|
|
|
|
|
APPLICATION : |
|
|
|
|
|
Dosage :
Hardness of Watergm/l
200 – 500ppm0.50 to 0.75
600 – 1000ppm1.00 to 1.50
After addition of dosages, stir water for 5 minutes & then continue the process. |
|
|
|
|
|
PACKING: 50Kgs. net in Plastic Container. |
|
|
» POLYCOL – DCH (Water Softener) |
|
|
POLYCOL-DCH is an effective water softening agent & it also chelates iron particles. Its double action ensures least wastage of scouring & bleaching agents & ensures better & excellent softening effect on the fabrics. |
|
|
|
|
|
GENERAL CHARACTERISTICS : |
|
|
|
|
|
» APPEARANCE: Colourless to pale yellow liquid.
» COMPATIBILITY: Good.
» SOLUBILITY: Readily soluble in water.
» CONSTITUTION: Based on organic acid salts.
» STABILITY: Stable to acids & alkalis as well as high temperature. |
|
|
|
|
|
SALIENT FEATURES : |
|
|
|
|
|
» Eliminates tendency of salt precipitation during wet processing.
» Maintains its sequestering activity across wide range of pH.
» Has excellent deffocculation property & dispersing action on suspended solids.
» Stable at high temperature. |
|
|
|
|
|
APPLICATION : |
|
|
|
|
|
Dosage :
Hardness of Watergm/l
200 – 500ppm0.50 to 0.75
600 – 1000ppm1.00 to 1.50
After addition of dosages, stir water for 5 minutes & then continue the process. |
|
|
|
|
|
PACKING: 50Kgs. net Plastic Container. |
|
|
» POLYCOL – HTSR (High Temperature Sequesterant) |
|
|
POLYCOL HTSR is a very effective high temperature stable sequestering agent which can be used in pretreatment. |
|
|
|
|
|
PHYSICAL CHARACTERISTICS : |
|
|
|
|
|
» APPEARANCE: Brown Liquid.
» IONIC NATURE: Anionic.
» SOLUBILITY: Soluble in water in all proportions.
» COMPATIBILITY: Compatible with anionic & nonionic products. |
|
|
|
|
|
SALIENT FEATURES : |
|
|
|
|
|
» Heavy metal ions such as ferric, copper & calcium are sequestered.
» Prevents risk of pin hole formation & breakages of the yarns in the fabric.
» Resistant to hydrolysis even under extreme temperature & pH conditions. |
|
|
|
|
|
APPLICATION : POLYCOL HTSR can be added @ 0.4 – 0.5g/l in all processing liquors & preferably at the commencement of the bleaching process. |
|
|
|
|
|
STORAGE: Stable under normal conditions. |
|
|
» POLYCOL – PST (Silicate free peroxide stabilizer) |
|
|
HIGHLIGHTS : |
|
|
|
|
|
» Replaces conventional sodium silicate completely.
» Regulates the uniform release of peroxide in bleach bath.
» Eliminates the problem of scale build up in the machines.
» Imparts fullness with good absorbency without any harsh feel to the bleached substrate.
» Enables uniform bleaching with improved degree of whiteness.
» Cost effective. |
|
|
|
|
|
PHYSICAL PROPERTIES : |
|
|
|
|
|
» APPEARANCE: Colourless to light pale yellow clear liquid.
» IONIC NATURE: Anionic.
» CONSTITUTION: Synergistic blends of salts. |
|
|
|
|
|
APPLICATION : POLYCOL PST can be effectively used at 1/6th to 1/4th level of hydrogen peroxide dosages. |
|
| (Note: The above information is offered as true and accurate to the best of our knowledge but without obligation and liability.) |
|
|
